In short:
- Work through every lockable door, window, slider, garage door and gate before you sign off the snag list, and test each one from both sides.
- Most new-build lock faults are fitting faults: a strike plate a few millimetres out, a door that has dropped on its hinges, a cylinder that is too long for the door.
- Ask the builder in writing whether the cylinders were construction-keyed and who still holds keys. If nobody can say, replacing the cylinders is the simple fix.
- Report lock snags to your builder in writing as soon as you find them. We fit replacement locks and cylinders; we don't cut or copy keys.
Why the locks deserve their own line on the snag list
Handover inspections tend to focus on paint, tiles and plumbing. Locks get a quick turn of the key at the front door and nothing more. Yet the hardware on a new house has usually been fitted near the end of the build, often by a different trade from the one that hung the doors, and the doors themselves are still settling. A latch that clicks home perfectly on handover day can start catching a month later when timber frames move and hinges bed in.
A methodical check now does two things. It catches the faults the builder should put right, while the builder is still on the hook for them. And it tells you exactly who can get into your new home, which is the question most owners only ask after something goes missing.
Door by door: what to test
Take the full set of keys, remotes and any codes the builder handed over, and go round the house in order. Test each door open and closed, from inside and outside, and lock it in each position it is meant to lock.
| Opening | Test | Snag if… |
|---|---|---|
| Front and back doors | Lock and unlock with every key supplied; turn the thumb-turn inside | Key needs jiggling, sticks, or only works with the door pushed or pulled |
| Internal doors | Close gently; the latch should catch without slamming | Door bounces open, rattles, or needs a shove to latch |
| Bathroom and en-suite | Privacy lock engages and has an outside release | No emergency release, or it won't turn |
| Sliding doors | Slide the full length; lock with the door fully closed | Lock won't engage, door drags, or the lock lines up only if lifted |
| Windows with locks | Every handle locks with the key supplied | Missing keys, keys that don't match, handles that turn while locked |
| Garage roller door | Run it with each remote and by hand where the maker allows | Uneven running, a lock that doesn't throw, remotes that don't all work |
| Driveway gate and motor | Open and close from each remote and the manual release | Gate stops short, reverses, or the release key is missing |
Count the keys as you go. Write down how many you received for each lock, because that number matters for the next section.
Latch and strike alignment
The commonest snag on a new door is simple misalignment between the latch or deadbolt on the door edge and the strike plate on the frame. Look at the strike plate: fresh scrape marks above or below the opening tell you the latch is hitting metal instead of dropping in. If the deadbolt only throws when you lift or press the door, the bolt is binding in the strike and the lock is working harder than it should.
Note the door, take a photo of the strike plate, and list it. Don't file the strike opening bigger yourself: it hides the real cause (often hinges or a frame that has moved) and can leave the latch with too little to hold onto.
Construction keys, and why cylinders often get changed after handover
During a build, many people need to open the doors: the site manager, electricians, plumbers, painters, cleaners, sometimes estate inspectors. Some lock makers solve this with construction keying. Dormakaba, for example, describes a system in which all cylinders are operated by one construction key during the build; turning the next-stage key in a cylinder then blocks the construction key from working again.
That is a good system when it is used as designed. The catch is that you, as the new owner, usually can't tell by looking whether your cylinders were construction-keyed, whether the change-over key has been turned in every one, or how many plain keys to your doors were handed out on site. Questions worth putting to the builder in writing:
- Were the cylinders construction-keyed, and if so, has each one been switched over to the owner's keys?
- How many keys were issued for each lock during the build, and have they all come back?
- Who holds the garage and gate remotes, and have unused remotes been removed from the motor's memory?
- Does any contractor still need access for outstanding snags, and how will that be arranged?
If the answers are vague, the straightforward fix is to replace the cylinders on the outside doors once the last contractor has left. We supply and fit new cylinders and locks as part of our lock replacement service; the new cylinders come with their own keys from the maker. We don't cut, copy or duplicate keys, and we don't copy remotes or access tags.
Sliders, the garage roller door and the gate motor
Large aluminium sliding doors are a frequent snag. The lock on a slider relies on the door sitting at exactly the right height in its track; if the rollers aren't adjusted, the hook bolt misses its keep and the door looks locked when it isn't. Check that the lock engages without lifting the door and that you can't slide it open once locked.
Roller shutter garage doors and driveway gates come with their own list: the lock or locking bar must throw fully, the springs should balance the door so it doesn't drop or fly up, and the motor should stop and reverse as its maker intends. Note anything that sounds or looks wrong while the installer is still responsible. Roller doors, gate locks, springs, motors and gate motors are all part of our normal work; our article on a roller door or gate motor that won't close covers the common faults.
Estate new builds around Paarl
A lot of new building in Paarl happens inside estates. Val de Vie's 2015 purchase of the neighbouring Pearl Valley estate included around 80 serviced, unsold plots, and agents still list vacant residential plots in Pearl Valley and Val de Vie, as well as in Courtrai and Klein Parys. If you're moving into a new home as a locksmith in Val de Vie customer, or need a locksmith in Pearl Valley, a locksmith in Courtrai or a locksmith in Klein Parys, the snag checks are the same.
Inside an estate, let the guardhouse know a locksmith is coming and have your ID or proof of residence ready. That's all we need on our side.
What not to do, and when to bring us in
- Don't spray oil into a stiff new cylinder. Lock makers differ on lubricants; ASSA ABLOY's care guide, for instance, warns against silicone-based lubricants. Follow the maker's instructions, and report stiffness on a new lock as a snag.
- Don't adjust hinges or strikes yourself while the builder still owes you repairs; you may muddy who is responsible.
- Don't sit on it. The NHBRC says enrolled builders must remedy minor defects identified within the first three months of occupation, and also notes that the three-month snag list itself isn't covered by its warranty. Check your building contract and report faults in writing, early.
Call us when the builder's period is over, when you want cylinders changed for peace of mind, or when a lock fails outright. Helpful details: a photo of each problem lock (face and door edge), the brand name on the lock or cylinder, the door material, and whether it's a front door, slider or gate. We quote on site before any work starts, and nothing is done until you agree. The R350 call-out applies, and you can pay by EFT, cash or card. For older houses rather than new ones, see locks on old Cape Dutch and heritage doors, and for a pool fence on the new property, pool gate locks and child safety. Everything else starts on our mobile locksmith in Paarl homepage.
Questions
Do I really need to change the locks on a brand-new house?
Not always. If the builder can confirm the cylinders were construction-keyed and switched over, and every key is accounted for, you may be fine. If nobody can tell you who held keys during the build, replacing the outside-door cylinders is a modest job that settles the question.
Can you make extra keys for my new locks?
No. We don't do key cutting or key copying. When we fit new cylinders, they come with keys from the maker; if you want more keys, ask about cylinders supplied with a larger key set before they are ordered.
The latch catches only when I slam the door. Is that a lock fault?
Usually not. It's normally a strike plate that's slightly out of line or a door that has dropped on its hinges. On a new build, list it as a snag for the builder. After that period, it's a quick repair job for us.
Need a locksmith to look at it?
If this hasn't solved the problem, our lock replacement service covers it. We're a mobile locksmith in Paarl, so we come to your door. Areas where this comes up often include Val de Vie Estate, Pearl Valley Golf Estate, Courtrai, Klein Parys.
Sources and further reading
- dormakaba: pextra PXP 1two3 Method (construction keying) — All cylinders are operated by one key during construction; turning the next-stage key blocks the Phase 1 key from working again; the owner's key later blocks earlier keys.
- NHBRC: Why enrol — Warranty cover for minor defects identified within the first three months of occupation; roof leaks within one year; major structural defects within five years; 3-month snag lists are not covered by the NHBRC warranty.
- ASSA ABLOY South Africa: Product Care and Maintenance (PDF) — Inspect the complete door, as faulty hinges and distorted frames load other components; do not use silicone-based lubricants; maker's lubrication guidance.
- Wikipedia: Val de Vie Estate — 2015 acquisition of the adjacent Pearl Valley Golf & Country Estate included approximately 80 serviced and unsold plots.
- Sotheby's International Realty SA: Vacant land for sale, Pearl Valley at Val de Vie search (Paarl) — Vacant residential plots listed in Pearl Valley Golf & Country Estate, Val de Vie Estate, Courtrai and Klein Parys (viewed 2026-11-17). Inference: new homes continue to be built in these areas.