Open 24/7 · R350 call-out fee · Price agreed on site before work startsPay by EFT, cash or card
Lock problems

Broken Key in a Gate Lock

In short:

  • Gate locks and padlocks live outdoors, so dust, rain and a sagging gate make them stiff long before they fail. A stiff lock plus a worn key is how most keys snap.
  • Keep the broken half, don't push anything into the keyway, and don't use superglue or a spare key to "hook" the piece out.
  • Whether part of the key sticks out matters: photograph it and say so when you call.
  • Broken-key extraction is a normal job for us. Afterwards the technician will tell you whether the lock can carry on or should be repaired or replaced.

Why gate locks break keys

A front-door lock spends its life indoors, more or less. A gate lock or a padlock on a chain spends it in the weather. Paarl has a Mediterranean climate: hot, dry summers when fine dust settles into every keyway, and wet winters when moisture gets into the mechanism and steel parts start to rust. One padlock maker notes that dust, particles and chemicals in the air settle in and on a lock over time and cause friction in the locking parts.

Add a few other everyday causes and a snapped key is easy to explain:

  • A gate that has dropped or moved. Hinges wear and sliding gates shift on their track, so the bolt or latch is pinched against the keeper and the key has to fight it.
  • A worn or thin key. Older keys, cheaper blanks and keys carried for years on a heavy ring crack at the shoulder.
  • The wrong key, nearly. Similar-looking keys for the gate, the garage and the side door go in part-way and get turned anyway.
  • Using the key as a handle. Pulling a heavy gate closed by the key puts sideways load on a part designed only to turn.

Which kind of gate lock do you have?

Common gate locks and what tends to go wrong
LockWhere you see itTypical weak point
Weatherproof gate lock (lock box welded or bolted to the gate)Pedestrian gates, swing gates, gates beside a drivewayWater and grit in the cylinder; latch dragging when the gate sags
Padlock on a chain or haspYard gates, farm and plot gates, side gates, workshop yardsDust in the keyway and shackle holes; rust on the shackle
Trellidor-style security gate lockInside or outside front doors and patio doorsMisalignment as the gate frame moves; worn cylinder
Lock on the pedestrian door of a motorised gateDriveway gates with a built-in walk-through doorExposure to weather and heavy daily use

For a padlock, look at the body for a brand name and a code stamped near the keyway. For a gate lock, a photo of the lock face and the edge of the gate where the latch meets the keeper tells us most of what we need.

Look before you touch

Shine a phone torch straight into the keyway and work out which of these you have:

Piece sticking outPhotograph it. Don't pull or wiggle. Piece flush or deeperPush nothing in. Lock face only. cylinder cutaway, key piece in orange
Illustration The broken piece holds the pins in place. Whether any of it protrudes changes how it's removed, so tell us which you see.
  • Is the gate locked or unlocked right now? If it's open, can you secure the property another way for the time being?
  • Does any of the key stick out of the lock face?
  • Is the broken key straight, or did it twist before it snapped? Keep the half you're holding: it shows the cut and the break.
  • Is the gate itself sagging, rubbing or out of line with its post or keeper?
  • Take two photos: the lock face close up, and the whole gate and lock from a step back.

What makes it worse

  • Superglue. The idea is to glue a stick or the other half to the piece and pull. In practice the glue runs into the cylinder, sets the pins solid and turns a clean extraction into a lock replacement.
  • Pushing the spare key in. It shoves the broken piece deeper, may jam behind it, and you can end up with two broken keys.
  • Pins, paperclips, tweezers and knife tips. They tend to push the piece further in or snap off inside it, and they scratch the keyway.
  • Hosing it with spray. A burst of oil can make the piece slippery and washes grit deeper into the mechanism. Advice on lubricants differs between lock makers. One padlock maker, for example, tells owners never to use dry graphite or silicone lubricant on its locks.
  • Hitting or levering the padlock. It rarely frees anything and can damage the hasp, the chain or the gate.
  • Forcing the gate. Rocking a gate to "help" the lock bends latches and damages motors on automated gates.

How extraction works, and what comes next

Getting a broken key out is a normal part of our broken-key extraction service. The technician removes the piece with purpose-made tools, working to avoid damage to the cylinder. If the broken piece is badly jammed or the cylinder is already corroded, they'll tell you before going further, and quote for any extra work.

Once the key is out, there are three likely outcomes:

After the extraction
What the technician findsLikely next step
The lock works smoothly with a good keyCarry on using it; keep it clean and lubricated as its maker recommends
The lock is stiff, worn or the gate is out of lineLock repair: clean, adjust and realign so the key turns freely
The cylinder or padlock is corroded or damagedReplace it, often with a lock better suited to outdoor use

Every option is quoted on site, before the work, and you choose. We don't cut keys, so if your remaining keys are worn, have new ones made at a key shop once the lock is sorted.

Stopping it from happening again

  • Clean and lubricate outdoor locks as the maker advises. One padlock maker suggests every three to six months, and every three months in very dusty or corrosive conditions.
  • Use only the lubricant the lock maker recommends, and use it sparingly.
  • Fix a sagging gate or a gate that rubs before it starts loading the lock.
  • Retire keys that are bent, cracked or worn smooth.
  • Choose padlocks and gate locks made for outdoor use, with a cover over the keyway where possible.
  • Never use the key as a handle to pull the gate.

Pool gates are a special case, because a lock that jams or a gate that won't self-close is a child-safety problem as well as a security one. See pool gate locks and child safety. If the gate in question is motorised and won't close, read roller door or gate motor won't close.

Gate locks around Paarl

Whether the gate belongs to a family home in one of the suburbs that border the Paarlberg Nature Reserve, such as Lemoenkloof, Groenvlei, Hoog-en-Droog or Vrykyk, or closes off a workshop yard in Dal Josafat, the advice above is the same. Wherever you are, we're a mobile locksmith in Paarl, open 24/7, with a R350 call-out, and the technician quotes on site before any work starts. Proof of ownership or residence is needed before we open a locked gate.

Questions

Can I still lock the gate tonight?

Usually not with that lock, because the broken piece holds the mechanism. Use a separate padlock and chain if you have one, or call us out; we're available 24/7.

Will the lock have to be replaced?

Not necessarily. Many locks carry on working once the piece is out. If the cylinder is corroded or was damaged when the key broke, the technician will explain that and quote for a repair or replacement before doing it.

The piece is right inside the lock. Can it still come out?

Often, yes, provided nothing has been pushed in after it and there's no glue in the keyway. Tell us it's flush or deeper when you call, and send a photo.

Need a locksmith to look at it?

If this hasn't solved the problem, our broken-key extraction service covers it. We're a mobile locksmith in Paarl, so we come to your door. Areas where this comes up often include Lemoenkloof, Hoog-en-Droog, Dal Josafat.

Sources and further reading

Request assistance

Four quick details. We reply by phone or WhatsApp, 24/7. For anything urgent, calling is quickest.

We use these details only to respond to your enquiry. See our privacy notice. Sending this form is a request for contact, not a confirmed booking.

CallWhatsApp