In short:
- A home cellar holds bottles you can't replace and that are easy to carry. Treat its door as an internal security door, not a pantry door.
- Decide who needs access first; the choice between a key, a keypad or both follows from that.
- Glass cellar doors need hardware planned before the glass is made, because toughened glass can't be drilled afterwards.
- Cellars are kept humid on purpose. That's kind to corks and hard on steel parts and timber doors, so locks need more regular checks.
- Whatever you fit, make sure the door always opens from inside without a key.
Why the cellar door deserves a real lock
Paarl has lived with wine for a long time. The town was home to the KWV, once the headquarters of the South African wine industry, and the Paarl wine route runs through the farms around it. Val de Vie, among vineyards south of town, has its own L'Huguenot wine cellar. It's no surprise that many homes here, in estates and in older suburbs alike, have a temperature-controlled cellar, a wine room off the dining room, or a glass-fronted tasting room.
A good collection is valuable, light enough to carry out by the case, and very hard to trace once it's gone. More often, though, the risk is closer to home: a bottle opened at a party that was being kept for a twenty-first, a house-sitter who helps themselves, or a curious teenager. A cellar lock is as much about control as about burglars.
Who should be able to get in?
Before choosing hardware, list the people who'll need the cellar and how often. The answer usually points at the right lock.
| Situation | What tends to work |
|---|---|
| Only the owners use the cellar | A good keyed lock; keys kept with the owners, not on the kitchen hook |
| Staff need access for deliveries or cleaning | A keypad with separate user codes you can delete when someone leaves |
| House-sitters or holiday tenants | Keypad with a temporary code, or a keyed lock with the key taken away |
| Entertaining: the cellar is opened during functions | A lock that can be left on latch during the evening and locked properly afterwards |
| A tasting room with glass doors on show | Lock hardware designed for glass doors, chosen with the glazier (see below) |
Keep the number of keys small and known. We don't cut, copy or duplicate keys, so when we fit a new keyed lock, the keys it comes with from the maker are the keys you have. That's a feature, not a flaw: you know exactly how many exist.
Keyed, keypad or both
A conventional keyed lock (a mortice lock or a cylinder lock) is simple and doesn't depend on batteries. Its weakness is the key itself: keys get lent, left in doors and lost.
A digital keypad lock solves the lending problem with codes and, on many models, fobs. Read the manual for the model you're considering. Yale's Keyfree manual, for example, describes a lock that runs on AA batteries, gives a low-battery warning, has a terminal on the front where a 9V battery can be held to power the lock if the batteries have completely failed, and keeps the inside handle engaged so you can always get out without unlocking first. That last feature matters in a cellar.
- Change the default code on day one, and give each person their own code if the lock allows it.
- Replace batteries when the low-battery warning sounds, not when the lock dies.
- Know how your model is powered in an emergency, and where its backup key (if it has one) is kept.
Glass cellar doors
Frameless glass doors look wonderful in a tasting room and complicate locking. Glass doors in homes are often toughened (tempered) glass, which must be cut and drilled before it's toughened; it can't be reworked afterwards, and cutting or grinding it later makes it shatter. In practice that means:
- Plan the lock with the glass. If you're commissioning a glass cellar door, decide on the lock and its position before the glazier orders the panel.
- On an existing glass door, look at hardware that clamps to the glass or locks into the frame or floor, rather than anything that needs a new hole in the panel.
- Ask the door maker or glazier what their door allows. We'll tell you plainly if a lock you want can't be fitted safely to the glass you have.
What cellar humidity does to locks and doors
Wine wants damp air. Decanter's storage advice puts the best humidity for fine wine at 65–70%, which keeps corks from drying out. Steel, brass and timber feel differently about it.
What damp does over time: steel springs and screws corroding sooner, a timber door taking up moisture and swelling so the latch no longer meets the strike, and keys that start to feel gritty. ASSA ABLOY's care guide recommends inspecting locks at least annually, more often in corrosive conditions, and says cleaning fluids must not be allowed into the lock or cylinder. Follow your lock maker's guidance on lubricants rather than reaching for a general-purpose spray; makers recommend different products, and the wrong one can gum up a mechanism. Where you can, mount keypads and other electronics on the drier side of the door and check the maker's installation notes.
Mistakes to avoid
- Fitting a lock that needs a key on the inside. If someone can be shut in a cellar, the door must open from inside without a key.
- Leaving the key in the door during a party and forgetting it there for weeks.
- Planing a swollen door in winter without understanding why it swelled; fix the damp or the seal, then adjust.
- Drilling or modifying glass to fit a lock.
- Telling everyone the master code instead of setting individual codes.
Getting it sorted
Call us to fit a new cellar lock, replace a corroded one, sort out a door that no longer latches, or open a cellar that won't open. Cellar and wine-room doors are part of our residential locksmith work, and our lock replacement and lock repair services cover the hardware. If we need to open a locked door, we ask for proof that you live there first and try non-destructive entry before anything else.
It helps to send photos of both faces of the door and its edge, the lock's brand, whether the door is timber, steel or glass, and how many people need access. We give you a quote on site before any work starts. R350 call-out fee. Payment by EFT, cash or card, any hour of the week. If you live in an estate, such as when you need a locksmith in Val de Vie, a locksmith in Pearl Valley or a locksmith in Boschenmeer, tell the guardhouse we're coming. For valuables beyond the wine, see choosing and looking after a cash safe; for outbuildings on the property, locks for stables and tack rooms. Our mobile locksmith in Paarl homepage has everything else.
Questions
Is a keypad lock a good idea on a wine cellar?
Often, yes, especially if several people need access and you want to remove someone's access without changing the lock. Choose a model that opens from inside without a code, and keep up with the batteries.
My cellar door sticks and the lock won't catch. Is the lock broken?
Usually the door has swollen or dropped, so the latch misses the strike. Forcing the key can damage the lock. Have the door and strike adjusted and the lock checked for corrosion.
The keypad on our cellar is dead and we can't get in. Can you help?
Yes. First check your manual: some models have an emergency power terminal or a backup key. If that doesn't work, we come out 24/7, ask for proof of residence, and try non-destructive entry first.
Need a locksmith to look at it?
If this hasn't solved the problem, our residential locksmith service covers it. We're a mobile locksmith in Paarl, so we come to your door. Areas where this comes up often include Val de Vie Estate, Pearl Valley Golf Estate, Boschenmeer Golf Estate.
Sources and further reading
- Decanter: What is the best humidity for storing wine? (Ask Decanter, 2021) — The best humidity for storing fine wine is 65–70%; low humidity damages wine over time.
- Yale UK: Keyfree digital lock manual (PDF) — AA batteries; low-battery warning; 9V battery can be held to the front terminal for emergency power; inside handle always engaged for emergency escape; fob slots.
- Wikipedia: Tempered glass — Must be cut to size before tempering and cannot be re-worked once tempered; drilling holes is done before tempering; cutting or grinding after tempering fractures the glass.
- ASSA ABLOY South Africa: Product Care and Maintenance (PDF) — Inspect at least annually, shorter intervals in corrosive environments; cleaning fluids must not penetrate the lock or cylinder; maker-specific lubricant guidance.
- Wikipedia: Paarl — Former headquarters of the KWV; Paarl wine route; Boschenmeer, Val de Vie and Pearl Valley gated communities south of town.
- Wikipedia: Val de Vie Estate — Neighbourhoods surrounded by vineyards; known for its L'Huguenot wine cellar.